[EMAIL PROTECTED] wrote: > I try to configure CBR for the interface GIgabit and the > fa0/1/0 (HWIC-4ESW interface) and it return an error.
I suspect you'll need to bridge on an SVI instead - try adding Fa1/0/1 to a VLAN, and bridge on the VLAN interface. HWIC-4ESW ports are plain layer 2 switchports and don't support the functionality of a routed port. (but most of this can be achieved through SVIs) Regards, Brad _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
