I know if you use VRF-Lite you binds logical interfaces to a VRF (normally one WAN-interface and one LAN-interface). If there is only one WAN-link, it must be divided into sub-interfaces (with F/R, channel-groups, Vlans etc). The same applies to single LAN-ports. Is it correct?
How exactly you guys use VRF when you bound to terminate all of your client on single or two interfaces along with GRE tunnel IP Source and Destination VRF membership. Regards, Masood Ahmad Shah -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Masood Ahmad Shah Sent: Friday, October 05, 2007 3:01 AM To: [email protected] Subject: [c-nsp] single interface multiple VRF Is it Possible to have 2 or more VRF tables existing on one single Interface Eth/Serial. If the answer is yes, how do you guys do that. Regards, Masood Ahmad Shah _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
