Can someone point me to some descriptive information about fabric errors and procedures to troubleshoot them. Basically I am looking for descriptive information on:
show fabric errors show fabric channel-counters remote command switch show fabric errors For instance, what do rxErrors mean on the channel counters, and how do they differ from errors shown by show fabric errors. What is the best procedure to troubleshoot rxErrors under channel-counters. I was told by TAC that any module in the system can cause rxErrors on any slot and channel, which I am skeptical of. How do show fabric errors differ from the switch and msfc point of view. So far I have yet to ever see an error under "show fabric errors", but they are not uncommon on the switch side. Has anyone had an rxError problem so great that they had to swap the chassis? Thanks! -- Chris Griffin [EMAIL PROTECTED] Sr. Network Engineer - CCNP Phone: (352) 273-1051 CNS - Network Services Fax: (352) 392-9440 University of Florida/FLR Gainesville, FL 32611 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/