I cannot find a good sample config for the ADSL WIC using PPP but no PPP auth. I have a static IP. I have tried doing no ppp auth within the Virtual-Template and Dialer interface, and placing the IP on ATM0/0, Dialer 0 and VT-1. Any clues ?
Config: interface ATM0/0 ip address 1.2.3.4 255.255.255.0 no atm ilmi-keepalive pvc 0/35 encapsulation aal5autoppp Virtual-Template1 ! dsl operating-mode auto no fair-queue ! interface Virtual-Template1 ip unnumbered ATM0/0 (no ppp auth seem hidden) LORD_dsl(config)#interface Virtual-Template1 LORD_dsl(config-if)#no ppp at LORD_dsl(config-if)#no ppp au LORD_dsl(config-if)#no ppp auth? authentication authorization LORD_dsl(config-if)#no ppp auth Debug: -- LORD_dsl#debug ppp ev LORD_dsl#debug ppp events PPP detailed event debugging is on LORD_dsl#debug ppp err LORD_dsl#debug ppp error PPP protocol errors debugging is on LORD_dsl#debug ppp ne LORD_dsl#debug ppp negotiation PPP protocol negotiation debugging is on LORD_dsl#^Z LORD_dsl# 1w1d: %ATM-5-UPDOWN: Changing VC 0/35 VC-state to PVC activated. 1w1d: %LINK-3-UPDOWN: Interface ATM0/0, changed state to up 1w1d: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0/0, changed state to up 1w1d: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up 1w1d: Vi1 EVT: Cstate [105] 4 0x82A65ED4 1w1d: Vi1 PPP: Treating connection as a dedicated line 1w1d: Vi1 PPP: Phase is ESTABLISHING, Active Open 1w1d: Vi1 PPP: Authorization NOT required 1w1d: Vi1 LCP: O CONFREQ [Closed] id 220 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 221 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 222 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 223 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 224 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 225 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 226 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 227 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 228 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: O CONFREQ [REQsent] id 229 len 10 1w1d: Vi1 LCP: MagicNumber 0x362FBF89 (0x0506362FBF89) 1w1d: Vi1 LCP: TIMEout: State REQsent 1w1d: Vi1 LCP: State is Listen 1w1d: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down 1w1d: Vi1 EVT: Cstate [106] 0 0x82A65ED4 1w1d: Vi1 LCP: State is Closed 1w1d: Vi1 PPP: Phase is DOWN 1w1d: Vi2 PPP: Phase is DOWN, Setup LORD_dsl#undeb 1w1d: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up all All possible debugging has been turned off James H. Edwards Senior Network Systems Administrator Judicial Information Division [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/