Hi, we acquired a customer that has an ATM circuit that is doing RBE dsl on a 7200. To save money we wanted to combine our existing DSL customers on the same ATM, our customers are mostly pppoe with some FRASI lines. Hi is there a way, or is if even possible, to have RBE VC's mixed with pppoe VC's on the same pvc ?
For example the interface below has multiple VCs that have natted or static ips routed to the end user. Is it possible to also offer pppoe, with an available address pool, on the same pvc along with the routed ips? If someone could point me in the right direction or give me an example that would be great. interface ATM5/0.100346 point-to-point ip unnumbered Loopback1 ip access-group dsl-inbound in no ip redirects no ip unreachables ip nat inside ip virtual-reassembly ip route-cache same-interface no ip mroute-cache ip policy route-map FA20RM no snmp trap link-status atm route-bridged ip pvc 1/346 encapsulation aal5snap service-policy output fbwfq ! TIA, P _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/