Hi
> > You can only create sub interfaces on a fastethernet or higher
It's hardware and software related. On a 2610 you can create
SubInterfaces (dot1.q only) on ethernet devices.
Ethernet0/0 is up, line protocol is up
Hardware is AmdP2, address is 0050.500f.58a0 (bia 0050.500f.58a0)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 7/255, rxload 1/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set
> possible to create subinterfaces on the 2610 onboard ETHERNET interface.
> So I guess this might somehow be software related... Maybe a newer
> version of the IOS for the 1721 makes this possible, too.
As far as I rember the 1721 has a different on board chip.
Regards
Erich
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
