Very good. I have options. I'll give those a try. -----Original Message----- From: Valentin Stoicescu [mailto:[EMAIL PROTECTED] Sent: Monday, November 12, 2007 2:52 PM To: Ruben Alvarez Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Cat6509 and transparent firewall
Ruben Alvarez wrote: > Hello, > > I have a client with a transparent firewall connected to my Cat 6509. Its > running PF firewall running on a server and currently I have then on a VLAN > with an interface VLAN as their gateway. The client has requested more IP > addresses. They don't want to renumber and I can't expand their current /28 > so I'm trying to think of a way to route another subnet to them. > > My first thought was to give them another VLAN and turn their switchport to > a trunk, but I don't know if a firewall like that can trunk with a Cisco > switch. Anyone have any ideas about this? The firewall has no IP address > for it is a bridge. > > Thanks. > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > BSD knows about vlan tagging 801.1q .. just needs the suport in the kernel for that. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/