Hi Mike, I had seen that issue in the past also after an IOS upgrade. That kind of counters keep track of failures occurred in the past and may show up even after the root cause has been fixed. So, these counters will be non-zero due to an issue which occurred in the past. My suggestion is to you clear the counters issuing: router# test mbus clear-jam-counts <slot #> If afterwards, it would show up again, probably you have some cards/faulty hardware.
Regards, Tiago -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael K. Smith - Adhost Sent: quinta-feira, 15 de Novembro de 2007 9:28 To: [email protected] Subject: [c-nsp] Weird Error Message in 'sho ver' on GSR after upgrade Hello All: I just upgraded from 12.0(28)S to 12.0(32)S8 on a 12008 and I'm now see this message in a show version. WARNING: Non-zero CAN jam reset counter in slot 18 WARNING: Non-zero CAN jam reset counter in slot 19 WARNING: Non-zero CAN jam reset counter in slot 20 Those are the Switch Fabric Cards. I've searched on CCO but there's nothing that matches. Does anyone know what these mean? Regards, Mike _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
