Hello, I'm seeing underruns errors on local STM1 interface, on the remote router i'm seeing runts, aborts and imput errors the controller is clean(during a certain period).
a policy map is created on the local router since there is lot of output traffic Policy Map Shaper Class class-default Average Rate Traffic Shaping cir 137000000 (bps) please advice! local-router#sh int pos1/1/0 controller POS1/1/0 is up, line protocol is up Hardware is Packet over Sonet MTU 4470 bytes, BW 155000 Kbit, DLY 100 usec, reliability 255/255, txload 161/255, rxload 170/255 Encapsulation FRAME-RELAY, crc 16, loopback not set Keepalive not set Scramble disabled LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/256, broadcasts sent/dropped 69/0, interface broadcasts 0 Last input 00:00:03, output 00:00:03, output hang never Last clearing of "show interface" counters 00:22:46 Input queue: 18/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: Class-based queueing <<<<<<<<<<<<<< a policy rate limiting is applying Output queue: 0/40 (size/max) 30 second input rate 103503000 bits/sec, 28439 packets/sec 30 second output rate 98274000 bits/sec, 16845 packets/sec 34956914 packets input, 10987190786 bytes, 0 no buffer Received 0 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 parity 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 23509473 packets output, 17366111957 bytes, 705 underruns 0 output errors, 0 applique, 0 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions POS1/1/0 SECTION LOF = 0 LOS = 0 BIP(B1) = 0 LINE AIS = 0 RDI = 0 FEBE = 0 BIP(B2) = 0 PATH AIS = 0 RDI = 0 FEBE = 0 BIP(B3) = 0 PLM = 0 UNEQ = 0 TIM = 0 TIU = 0 LOP = 0 NEWPTR = 61 PSE = 61 NSE = 0 Active Defects: None Active Alarms: None Alarm reporting enabled for: SF SLOS SLOF B1-TCA B2-TCA PLOP B3-TCA Framing: SDH APS COAPS = 0 PSBF = 0 State: PSBF_state = False Rx(K1/K2): 01/00 Tx(K1/K2): 00/00 S1S0 = 02, C2 = CF Remote aps status (none); Reflected local aps status (none) CLOCK RECOVERY RDOOL = 0 State: RDOOL_state = False PATH TRACE BUFFER: STABLE Remote hostname : remote-router Remote interface: POS9/1/0 Remote IP addr : 0.0.0.0 Remote Rx(K1/K2): 00/00 Tx(K1/K2): 00/00 BER thresholds: SF = 10e-3 SD = 10e-6 TCA thresholds: B1 = 10e-6 B2 = 10e-6 B3 = 10e-6 Clock source: internal remote-router#sh int pos9/1/0 controller POS9/1/0 is up, line protocol is up Hardware is Packet over Sonet MTU 4470 bytes, BW 155000 Kbit, DLY 100 usec, reliability 255/255, txload 96/255, rxload 166/255 Encapsulation FRAME-RELAY, crc 16, loopback not set Keepalive not set Scramble disabled FR SVC disabled, LAPF state down Broadcast queue 0/256, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 00:08:44 Input queue: 18/75/1812/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 30 second input rate 101192000 bits/sec, 16987 packets/sec 30 second output rate 58761000 bits/sec, 24464 packets/sec 8894360 packets input, 6582475450 bytes, 0 no buffer Received 0 broadcasts (0 IP multicasts) 912 runts, 0 giants, 0 throttles 0 parity 1206 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 366 abort 13133325 packets output, 3998372082 bytes, 0 underruns 0 output errors, 0 applique, 0 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions POS9/1/0 SECTION LOF = 0 LOS = 0 BIP(B1) = 0 LINE AIS = 0 RDI = 0 FEBE = 0 BIP(B2) = 0 PATH AIS = 0 RDI = 0 FEBE = 0 BIP(B3) = 0 PLM = 0 UNEQ = 0 TIM = 0 TIU = 0 LOP = 0 NEWPTR = 1105 PSE = 1666 NSE = 0 Active Defects: None Active Alarms: None Alarm reporting enabled for: SF SD SLOS SLOF B1-TCA LAIS LRDI B2-TCA PAIS PLOP PRDI PPLM PUNEQ PTIM PTIU B3-TCA RDOOL Framing: SDH APS COAPS = 0 PSBF = 0 State: PSBF_state = False Rx(K1/K2): 00/00 Tx(K1/K2): 00/00 S1S0 = 02, C2 = CF Remote aps status (none); Reflected local aps status (none) CLOCK RECOVERY RDOOL = 0 State: RDOOL_state = False PATH TRACE BUFFER: STABLE Remote hostname : local-router Remote interface: POS1/1/0 Remote IP addr : 0.0.0.0 Remote Rx(K1/K2): 01/00 Tx(K1/K2): 00/00 BER thresholds: SF = 10e-3 SD = 10e-6 TCA thresholds: B1 = 10e-6 B2 = 10e-6 B3 = 10e-6 Clock source: line no IP configured since there is sub interface with frame relay encapsulation _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/