int a1/0.409 rate-limit input 20000000 3750000 7500000 conform-action transmit exceed-action drop rate-limit output 20000000 3750000 7500000 conform-action transmit exceed-action drop
Andy On Thu, 20 Dec 2007, Duracom Lists wrote: > I have the need to limit a customer to 20M Up and 20M Down. The scenario is > they are connected to our OC3 ATM via a 45M DS3 but only paying for 20M, so > can you rate limit the entire interface that they are on without doing an > Access list to match IP's since they have several IP's from different Class > C's? If so can you give me an example of the command? > > IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(29) > > > > interface ATM1/0.409 point-to-point > description Connection <=> Customers01 > ip address x.x.x.x 255.255.255.252 > no ip redirects > no ip unreachables > no ip proxy-arp > no ip mroute-cache > pvc 4/409 > vbr-nrt 40000 40000 1 > no broadcast > oam-pvc manage > encapsulation aal5snap > no protocol ip inarp > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 --- _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/