Quoting Masood Ahmad Shah <[EMAIL PROTECTED]>: > Well, better you check current MTU settings using command > > # sh interfaces | inc MTU > > And cheers :) > > Yes of course you need to adjust routers MTU as well; if you are running > with MPLS or gre >
Thanks Masood. I've run into a strange problem on the 2950's - Both devices are C2950G-24-EI (Which support baby giants), but the one with the more recent IOS is only reporting that it supports 1500 byte mtu?: Model number: WS-C2950G-24-EI System serial number: FOC0833X3M8 System image file is "flash:c2950-i6q4l2-mz.121-22.EA7.bin" No baby giant support: gc-sw-08(config)#system mtu ? <1500-1500> MTU size in bytes Whereas: Model number: WS-C2950G-24-EI System serial number: FOC1012Z5BJ System image file is "flash:/c2950-i6q4l2-mz.121-22.EA6.bin" Baby giant support: ESW01-BNE(config)#system mtu ? <1500-1530> MTU size in bytes I compared both images on the Feature Navigator, and there is no mention of any Features unique to the images other than "IEEE 802.1x - Auth Fail VLAN" on the EA7 vers.? ------------------------------------------------------------------------- This e-mail was sent via Data FX Online WebMail http://www.datafx.com.au/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
