Hello List, I have a router which is overloaded. His processor goes up to 99% load. When issuing a "sh proc cpu" command, the one with the higgest load is the Crypto PAS Proc. Do you have a hint?
#sh proc cpu | begin crypto 188 4 79 50 0.00% 0.00% 0.00% 0 crypto engine pr 189 52 4 13000 0.00% 0.00% 0.00% 0 Crypto CA 190 0 1 0 0.00% 0.00% 0.00% 0 Crypto PKI-CRL 191 0 1 0 0.00% 0.00% 0.00% 0 Crypto SSL 192 20 39 512 0.00% 0.00% 0.00% 0 Crypto ACL 193 0 1 0 0.00% 0.00% 0.00% 0 CRYPTO QoS proce 194 0 1 0 0.00% 0.00% 0.00% 0 Crypto INT 195 3148 1478 2129 0.00% 0.00% 0.00% 0 Crypto IKMP 196 324 467 693 0.00% 0.00% 0.00% 0 IPSEC key engine 197 0 1 0 0.00% 0.00% 0.00% 0 IPSEC manual key 198 1572920 623302 2523 0.49% 30.23% 12.23% 0 Crypto PAS Proc 199 0 81 0 0.00% 0.00% 0.00% 0 Crypto Delete Ma 200 4 678 5 0.00% 0.00% 0.00% 0 Key Proc 201 0 1 0 0.00% 0.00% 0.00% 0 PM Callback 202 0 1 0 0.00% 0.00% 0.00% 0 DATA Transfer Pr 203 0 1 0 0.00% 0.00% 0.00% 0 DATA Collector 204 260 3469 74 0.08% 0.00% 0.00% 0 AAA SEND STOP EV 205 0 3 0 0.00% 0.00% 0.00% 0 EEM ED CLI 206 0 2 0 0.00% 0.00% 0.00% 0 EEM ED Counter 207 0 2 0 0.00% 0.00% 0.00% 0 EEM ED Interface 208 0 3 0 0.00% 0.00% 0.00% 0 EEM ED IOSWD 209 0 2 0 0.00% 0.00% 0.00% 0 EEM ED Memory-th 210 0 2 0 0.00% 0.00% 0.00% 0 EEM ED None Thanks in advance. Steph DISCLAIMER: This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
