I have two lab routers through which I would like to monitor Jitter & Error.
On one, the poller, I have: rtr 1 type jitter dest-ipaddr 10.0.0.1 dest-port 10000 source-ipaddr 10.0.0.2 num-packets 1000 request-data-size 200 verify-data tag vlan100-jitter frequency 120 rtr schedule 1 life forever start-time now On the other, the responder, I have: rtr responder This seems to work fine I get data, however, I would like to limit this to a single IP and port, so I try adding the following command: rtr responder type udpEcho ipaddress 10.0.0.2 port 10000 As soon as I do this, I get all MIA packets on the poller and failed operations due to a timeout or no connection. Both are 12.2(28)SB2 I checked the Open Caveats and can't find anything, is there a better way to do this? Thanks G _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
