Hello,
I have numerous Cisco 3750-48-PS-S in stacks consisting of either 2 members or 8 members; current IOS is C3750-IPSERVICESK9-M, Version 12.2(40)SE. A simple input service-policy has been created to mark traffic entering the port - classification is matched using extended access-lists. Applying the 'service-policy mark-dscp input' works with no issues and all works as expected. The problem is when the switch stack is rebooted the service-policy is no longer applied to some of the Ethernet ports (seems to be stack member specific); the funny thing is that some ports do have the policy applied. For example Ports Fa1/0/1 - 48 will have service-policy applied where Ports Fa2/0/1 - 48 will not have the service-policy applied. I can go back and re-apply the service-policy to the ports after the reload but this really isn't a viable solution. Checked the log for errors on reload and nothing is logged. Lastly... since upgrading to 12.2(40) we've been having issues with SNMP timeouts esp. with the 8 member stack. Specifically we are querying the bridge table for MAC addresses and then matching them to the associated active port -> product in use is FlukeNetworks Netwhere. Prior to the upgrade we were running 12.2(37) and didn't exhibit any SNMP timeouts. I'm considering downgrading the IOS release as we don't need all the new features that are being released. However, there's numerous versions of the IOS available on the Cisco website so what version would everyone recommend; we are doing a little of L3 switching i.e. inter-vlan routing (at most 2-3 vlans) but predominantly L2 based switching. Thanks! Craig "Reality is merely an illusion, albeit a persistent one." Albert Einstein _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/