do you have "logging event link-status" on the interfaces?
On Mon, 4 Feb 2008, William wrote: > Hi, > > I have a Cisco 4500 running 12.1 IOS code. > > It would seem we are not getting up/down port events in the log > buffer, to setup logging we have: > > logging source-interface Vlan1 > logging 192.168.1.1 > > we did set the logging buffer to informational (this doesnt show in > show run for some reason?), this is confirmed in 'sh logging' but we > aren't seeing the information we would expect! > > Is there something I've missed? I am getting messages on counters > being cleared and configuration from console but that seems to be it. > > Cheers, > > W > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/