Hello folks, Sorry for hammering on the list again for help, but this is my first T1 done this way. We have a channelized DS3 coming in on a PA-MC-T3 card on a 7206. We are getting LCP errors from the far end. I suspect it's because I haven't set up any PPP authentication on the 7206 end, BUT I don't know how to get past this.
With "debug ppp auth" enabled I see: AAA/AUTHOR/LCP: Denied Here is the config of the individual T1 interface: interface Serial4/0/1:0 description Titan Manufacturing ip address 10.0.0.5 255.255.255.252 no ip redirects no ip unreachables no ip proxy-arp encapsulation ppp no cdp enable Is there a PPP command that will tell my end, (7206 with the DS3), that no authentication is necessary? The far end is a Kentrox T1 router and we've never needed to configure a PPP username/password with those, when they are talking to each other on both sides of the T1. Thanks for any advice. -Nick Voth _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/