Robert Hass wrote: > Hi > > I just wondering about Cisco CAB-SFP-50CM= (Catalyst 3560 SFP > Interconnect Cable, 50cm). > Can I use it for: > > 1) Connect two Cat6500/Sup32 together via CAB-SFP-50CM= (2 for each > switch) and form 2Gb/s PortChannel ? > 2) Connect Cat2960G to two Cat6500 ? (and provide redundancy via RSTP) > > It could be nice alternative to SFP SX...
Robert, I can't think of a technical reason why it wouldn't work, as far as the IOS is concerned (though I have never tried it). I would say that the cable is very short. 50cm isn't very long at all. You could potentially do it if the 6500s are in adjacent 2-posts with no vertical wire managements between the 2-posts but the overall length would be questionable. One thing I'll point out is that in our 3560s the SFP-50CM pops out of the SFP bay *very easily*. I wire-tied the slack to the frame to prevent them from popping out, again. FYI Justin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
