Get a RJ45-RJ45 patch panel - That is, a panel with RJ45 connectors wired straight through on both sides. Plug your octal cable into one side, then run patch cables to your devices and use a RJ45-DB9 adapter. Or you can run a patch cable directly into a device that has a RJ45 console port. That way you can always roll the device side cable, or use a differently wired RJ45-DB9 adapter for anything that is unusual.
Eric Helm wrote: > Hello, > > Can anyone recommend a good solution for a 2610XM + NM-32A terminal > server that will be connecting mostly to equipment with a DB9 serial > port. Would prefer something that is a 19" rack mounted patch panel that > could directly attach to the 68-pin connectors on the async modules and > break out into 16 or 32 DB9 ports. Otherwise something that can take the > RJ45 on the back and have DB9 on the front would work too. > > > Thanks, > /Eric > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
