Hello, Has anyone successfully used port-channel on a 3800 series router before? I could configure it, and it seems to be okay. I haven't try to see if it actually load-share traffics, but a simple ping test /shutdown one interface works fine. But according to Cisco, this is not supported?
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_qas0900aecd8016a953.html Q. Is Cisco EtherChannel(R) supported on the two onboard Gigabit Ethernet ports? A. No. Cisco EtherChannel is not supported on the onboard Gigabit Ethernet ports. Instead, Cisco EtherChannel can be configured on Gigabit Ethernet HWICs, Gigabit Ethernet network modules, and Fast Ethernet ports on Cisco EtherSwitch HWICs and network modules when the ports are in switchport mode. Thanks. -lmn _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
