If the switch is either in 'bus-mode' or 'compact-mode' the below limitation with rate-limiters should not be there.
So, if you only have fabric-enabled cards, you will be compact mode, so you are not affected. If you have 'force bus-mode', we will force to bus-mode, so you are not affected either. sukumar -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Rathlev Sent: Monday, March 03, 2008 5:29 AM To: cisco-nsp Subject: [c-nsp] Sup720 MLS rate-limiting and truncated/compact mode Hello, Reading the documentation for 12.2SXF and MLS rate-limiters, I see the following sentence: "Layer 2 rate limiters are not supported in truncated mode." http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/na tive/configuration/guide/dos.html http://tinyurl.com/yqlylf Not that I'd be interested in this kind of rate-limiting for anything other than tests, but I was wondering what "in truncated mode" means exactly. Is it _only_ in truncated mode, or is one of "pure bus mode" or compact mode also affected? Like if I happen to have "fabric switching-mode force bus-mode" configured, or if I only have fabric-enabled cards? Thanks, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
