Jason Berenson wrote: > Can you elaborate on that a bit? I believe he might be referring to the power consumption.
Peace... Sridhar > e ninja wrote: >> c10k is a beast. You're better of with the VXRs. >> >> /eninja >> >> >> >> On Wed, Mar 12, 2008 at 8:40 PM, Jason Berenson <[EMAIL PROTECTED] >> <mailto:[EMAIL PROTECTED]>> wrote: >> >> Greetings, >> >> We currently have 3 7206VXRs with NPE-300's in them. Adding PA-MC-T3 >> cards for DS1 edge connectivity at $3800/port is starting to get >> really >> unbearable. So I started to look at the Cisco 10k and noticed >> that an 8 >> port channelized DS3 card turns out to be around $1800/port. I've >> done >> a lot of research on the 10k and am interested in migrating away from >> the 7206's. >> >> I'd like to use the 10k as our core edge router, it would need to run >> QoS, VRFs, OSPF, BGP, vlans (would expect that), connectivity for TLS >> customers and eventually DS1 channelized OCx ports to connect to our >> Turin DAX so we can move away from copper and towards the light so to >> speak. :) >> >> If anyone could give me input on their experience with the 10k as >> a 7206 >> replacement as well as any input on models of the PREs that I >> should be >> looking at and models on different cards like channelized DS3 and OCx >> cards I would greatly appreciate it. I'd most likely go with 48V >> power >> since we already have a distribution system in place. >> >> The more information the better, I'd like to start looking at ebay for >> parts and get a pitch setup for the higher-ups. Any >> input/experience on >> the feasibility of selling off the VXRs and expensive DS3 cards >> would be >> good too. I'd also like to hear what people would expect me to be >> paying for each of the components needed to put together a fully >> functional 10k. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
