Thanks for all replies. Diogo
On Thu, Mar 13, 2008 at 2:32 PM, Sukumar Subburayan (sukumars) < [EMAIL PROTECTED]> wrote: > Since, the 6148 linecard does not have a DFC, and relies on central > forwarding from the EARL on the sup, > you could check the current forwarding rates of the Central EARL using > either: > > sup-720#show mls statistics > > Statistics for Earl in Module 6 > > L2 Forwarding Engine > Total packets Switched : 85667923 <--- > > L3 Forwarding Engine > Total packets L3 Switched : 77712372 @ 20 pps <---- > > or > > > > 2-13-mid-720#show platform hardware capacity forwarding > <snip> > > Forwarding engine load: > Module pps peak-pps > peak-time > 5 20 2882 23:35:31 UTC Sun Nov > 30 2008 > 6 22 2791 23:35:17 UTC Sun Nov > 30 2008 <---- > > > sukumar > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Diogo Montagner > Sent: Thursday, March 13, 2008 7:00 AM > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] WS-X6148-RJ-21 performance check > > Hi all, > > how I can check if a C6513/WS-X6148-RJ-21 module reached the maximum > forward capacity (in this case 15 Mpps) ? > > Best regards, > Diogo > > -- > ./diogo -montagner > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- ./diogo -montagner _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/