Guys Im stuck in configuring MPLS L3VPN in Cisco + juniper in my test lab environment.
I have Cisco 10K as PE connected to DSL IPoA client, Cisco 7206VXR as another PE connected with other IPoA client. MPLS P routers are of Juniper (J4300). for MPLS L3VPN there is no need to run LDP on core facing interfaces if we r using RSVP as TE LSP. i have configured every thing right (a/c to me)....and check that vpn-v4 routes are shared b/w both PEs. Tunnels are also UP. but traffic is carrying though MPLS...core. As i enable LDP on juniper core facing interfaces, as it is enabled by default on Cisco routers.....traffic flow start. This is amazed me. Kindly suggest me about this scenario. any sample configuration is welcome. Also, one more thing i check while enabling LDP & RSVP both, i have received routes from LDP paths not RSVP...and VPN routes are avaiable though LDP path...means...there is no traffic engineering. is there any way to check the route-prefernce of LDP and RSVP on Cisco....as it is 7 for RSVP & 9 for LDP on Juniper. Is there any way that LDP is got tunneled over RSVP? Regards Fahad _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/