I have a question about how to get the cisco routers updates rate of one of the snmp mib entries.
Background: I am using a cisco 3640 series router running ios 12.4. I am cyclically doing snmpwalks to get the number of bytes transmitted on an output interface for a particular Diff serv code point. The actually snmpwalk call is for cbQosMatchPrePolicyByte (enterprises.9.9.166.1.16.1.1.5) in the CISCO-CLASS-BASED-QOS-MIB mib. My problem. I would like to compute the number of bytes sent per second as quickly and accurately as possible. However I found that the above mib entry can be updated anywhere from 6 to 10 seconds. Sometimes if I poll this snmp entry every 8 seconds the entry hasn't had a chance to change yet and my message rate incorrectly is 0 kbs. My question: 1) Is there somewhere in the mib or cisco's command line interface where I can get the cyclic rate that is being used? Or the timestamp when the MIB entries are being updated? 2) Is it possible to set this rate via snmp or the cisco command line interface and make the router update at a fixed interval of my choosing? 3) Alternatively, Is there a way to generate SNMP traps when router updates its traffic statistics for some DSCP value? Thanks for any inputs, -Proveen _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/