Hi all, I post this here because I think that there are a lot of Nagios users on this list that might find the following useful.
I recently enriched a Nagios plugin to check all sorts of Juniper hardware using SNMP. The original plugin also let you alow to check Cisco blades/modules and is created by Patrick Proy (http://nagios.manubulon.com/) but he never published this updated version on his site but I think you like it. Here is a example output of a Cisco 6500 router that had some problems: #./check_snmp_environment.pl -H <ip> -C <snmp> -T ciscoSW Card slot 0(Centralized Forwarding Card): status DownCard slot 4(CEF720 4 port 10-Gigabit Ethernet): status Down7/9cards OK, 0modules OK : CRITICAL and on a 12400: #./check_snmp_environment.pl -H <ip> -C <snmp> -T ciscoSW Card slot 0(Performance Route Processor): status Down, : 6/7cards OK, : CRITICAL See the following site for more details and download: http://www.nagiosexchange.org/Networking.53.0.html?&tx_netnagext_pi1[p_view]=1269 Michiel _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
