Running 12.2.33SXH1 with SFP-GE-S style SFPs. Module 1 is a 6724. show int transceiver Transceiver monitoring is disabled for all interfaces.
If device is externally calibrated, only calibrated values are printed. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. NA or N/A: not applicable, Tx: transmit, Rx: receive. mA: milliamperes, dBm: decibels (milliwatts). Optical Optical Temperature Voltage Current Tx Power Rx Power Port (Celsius) (Volts) (mA) (dBm) (dBm) ------- ----------- ------- -------- -------- -------- Gi1/9 39.8 3.27 4.8 -6.2 -6.1 Gi1/10 40.7 3.26 4.5 -5.6 -6.1 Gi1/11 40.0 3.27 4.4 -5.1 -6.5 Gi1/12 39.8 3.27 4.7 -5.8 -6.7 Gi1/13 40.0 3.27 4.3 -5.5 -5.5 Gi1/15 40.7 3.28 4.5 -5.5 -6.0 Gi1/16 40.7 3.28 4.6 -5.8 -5.1 Gi1/17 40.8 3.27 4.3 -5.5 -5.1 Also noticed in inventory: NAME: "Gi1/15", DESCR: "1000BaseSX" PID: , VID: , SN: NAME: "Gi1/15 Module Temperature Sensor", DESCR: "GigabitEthernet1/15 Module Temperature Sensor" PID: , VID: , SN: NAME: "Gi1/15 Supply Voltage Sensor", DESCR: "GigabitEthernet1/15 Supply Voltage Sensor" PID: , VID: , SN: NAME: "Gi1/15 Bias Current Sensor", DESCR: "GigabitEthernet1/15 Bias Current Sensor" PID: , VID: , SN: NAME: "Gi1/15 Transmit Power Sensor", DESCR: "GigabitEthernet1/15 Transmit Power Sensor" PID: , VID: , SN: NAME: "Gi1/15 Receive Power Sensor", DESCR: "GigabitEthernet1/15 Receive Power Sensor" PID: , VID: , SN: The release notes mention Digital Optical Monitoring (DOM) Phase 2 as a new feature. Is DOM now officially supported on the 6724?? -- Chris Griffin [EMAIL PROTECTED] Sr. Network Engineer - CCNP Phone: (352) 273-1051 CNS - Network Services Fax: (352) 392-9440 University of Florida/FLR Gainesville, FL 32611 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/