-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Justin Shore wrote: > I should have thought of that. :-( > > http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80169bd6.html > > > Justin - --------------------------- Bummer because I thought I read somewhere that someone was able to force WIC-1DSU-T1 to function with 2811 under 124-11.XJ.bin. Maybe I misread. I'm sure I don't have a counterfeit WIC.
WIC Slot 0: FT1 BT8360 WIC module not supported/disabled in this slot Hardware revision 1.3 Board revision E0 Serial number 28963342 Part number 800-03279-04 FRU Part Number WIC-1DSU-T1= Test history 0x0 RMA number 00-00-00 Connector type Wan Module EEPROM format version 2 EEPROM contents (hex): 0x20: 02 11 01 03 01 B9 F2 0E 50 0C CF 04 00 00 00 00 0x30: 70 00 00 00 02 08 25 01 FF FF FF FF FF FF FF FF regards, /virendra > > Ben Mason wrote: >> The WIC-1DSU-T1 is not supported in a 2811 you need to use a >> WIC-1DSU-T1-V2 > > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFH9VQhpbZvCIJx1bcRAswlAJ9spygoboHg9gOY0QgT53M4yyx+IwCeIpKf 0I7zZFex8Unv10brhH9qaHQ= =BMcN -----END PGP SIGNATURE----- _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/