> Can I run both at the same time? If you do, you may want to consider tweaking the administrative distances until EIGRP has been fully implemented across the network. Remember, by default EIGRP has an AD of 90 (internal) and OSPF of 110, so EIGRP-learned routes will be preferred. This has the potential to cause problems if EIGRP is misconfigured or only partially enabled during migration.
stretch http://www.packetlife.net/ Dan Letkeman wrote: > Hello, > > I would like to change our layer 3 switches from ospf to eirgrp. Is > there a way I can accomplish this on a live system without causing > problems? Can I run both at the same time? > > Thanks, > Dan. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/