I am trying to configure an ASA in Transparent mode running 7.2(3) version of code. It has trunk interfaces trunking vlans 100,101 on both the inside and outside interfaces of the device. However the ASA will not let me assign VLAN 100,101 to subinterfaces on both sides of the firewall. Does anyone have a working configuration on how to accomplish this? I want to trunk 2 VLANs through a L2 firewall using the same VLAN tags on each inside/outside sides of the firewall.
TIA Mike ________________________________ Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
