Justin, David, It crashes when I put the card in and keeps crashing on a reboot. I did get it to boot with 12.3.26. When I put the PA-MC-T3 card in at that point it's ok but when I put the ATM OC3 card in it crashes.
When I have this router configured with an NPE-400 and these two cards it seems to work just fine. I'm about to throw these 7206's out the window and watch them slam into the pavement 10 floors down. -Jason Justin M. Streiner wrote: > On Fri, 18 Apr 2008, Jason Berenson wrote: > > >> I'm going to be upgrading a couple of 7206VXR NPE-350's to G1's tomorrow >> night. I'm testing right now with the latest IP plus software: >> c7200-is-mz.124-19.bin. When I pop in a PA-MC-T3 the router promptly >> crashes: >> >> 10:44:58 UTC Fri Oct 8 2004: Data Bus Error exception, CPU signal 10, >> PC = 0x60 >> 98AAA0 >> >> -------------------------------------------------------------------- >> Possible software fault. Upon reccurence, please collect >> crashinfo, "show tech" and contact Cisco Technical Support. >> -------------------------------------------------------------------- >> > > You can try another version of code and see if that works better. If not, > your best bet is to open a case with the TAC. > > Does the router crash when you insert any other port adapters? > Does the router crash regardless of which slot/bus you put the PA-MC-T3 > in? > Is it a PA-MC-T3, or a PA-MC-T3+? > > jms > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
