At 03:57 PM 13-05-08 +0000, [EMAIL PROTECTED] wrote: >Yes, use the switchport capture feature. > >http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/sx_swcg.pdf >create the VACL first and then set a switchport as "capture". > >You can apply the VACL to a WAN interface.
Thanks. I found: <http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/vacl.html> but would like to see an IOS config of this in action. Something that would take: monitor session 1 source interface Gi7/1 tx monitor session 1 destination interface Gi9/16 monitor session 2 source interface Gi7/1 rx monitor session 2 destination interface Gi9/17 and do the same via VACLs. If you can send actual IOS snippets that would be great! Thanks, Hank _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
