No Idea.
All my OSPF only work on primary address.
Had tried with secondary, no luck.
What I did to solve this, change the primary address mask to have more
space of IPs.
rgs
a. rahman isnaini r.sutan
W3 - Warung With Wi-Fi Jogjakarta
Masood Ahmad Shah wrote:
Can OSPF establish as neighbors on secondary addresses? Do not have any luck
unless the OSPF network interface is primary. Any ideas why and how do we go
around this?
What if a ROUTERA is connected to a wireless bridge which is serving
multiple sites . Or there can be many other situation when you need to build
adjacency on secondary IP address instead of primary IP.
Oops I can't find any parameter (when I configure secondary address on Cisco
Router) like preferred/primary . thanks to juniper guys for providing it ;)
J
Thanks in advance.
Regards,
Masood Ahmad Shah
-------------
ROUTERA
interface FastEthernet1
ip address 2.100.220.113 255.255.255.248
ip address 2.100.220.97 255.255.255.248 secondary
ip address 2.100.230.81 255.255.255.248 secondary
no ip redirects
no ip directed-broadcast
!
router ospf 100
log-adjacency-changes
area 3.3.3.102 stub no-summary
network 2.100.230.80 0.0.0.7 area 3.3.3.102
--------------
ROUTERB
interface Ethernet0
ip address 2.100.230.86 255.255.255.248
!
router ospf 100
log-adjacency-changes
area 3.3.3.102 stub
passive-interface BRI0
network 2.100.230.80 0.0.0.7 area 3.3.3.102
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
