On (2008-06-23 10:02 -0500), Frank Bulk wrote: > Can you detail how SRB2 froze? We're at SRB1 having experienced our second > downtime that is XDR-related. We're being recommended to go to SRB3.
Progressively. First issue was, that 'write' hanged, then after some moments we couldn't even telnet to the box anymore. SRB3 is supposed to fix it, but as we were happy with SRC's, we didn't roll back to SRB. > Frank > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Saku Ytti > Sent: Sunday, March 30, 2008 5:52 AM > To: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] 12.2 SRC opinions? > > On (2008-03-30 08:58 +0200), Andrew Alston wrote: > > > All in all... I don't recommend SRC in production unless you have a damn > > good reason for it. > > This is always true for early piece of new software, use only if you must. > Having said that, for our config SRB2 didn't work, would just freeze, > that issue will be addressed in SRB3 and has been addresed in SRC, > so for now, we're stuck with SRC on few boxes, with particularly > large configuration. > > <snip> > > -- > ++ytti > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- ++ytti _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/