How long ago were the switches installed? Is it possible there is an accumulation of dust on the module/ASICs?
Chuck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Koen Sent: Thursday, July 10, 2008 8:42 AM To: [email protected] Subject: Re: [c-nsp] High temperatures on cisco 6504-E chassis Hi Robert, I didn't read anything about this but if i look at some others chassis like a 6509 the in- and outlet temps are higher but the asic temps are 31C. Could it be the fan-tray of a 6504-e isn't powerfull enough to cool the chassis? Thanks, Koen Robert E. Seastrom wrote: > Koen <[EMAIL PROTECTED]> writes: > >> We got 2 WS-C6504-E chassis both with 1 sup 7203CXL and 2 >> WS-X6748-GE-TX and we see that the asic temperature is always higher >> then 40C which is the max operational temperature according to the >> docs. > > The max operational temperature quoted in documentation is almost > always ambient (or inlet) temperature, not the temperature of any > particular hot spot on the board. At 30c inlet, you're well within > spec. Is there something you have read that leads you to believe > things are different in this case? Can you point me there if so? > > -r > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
