Samit wrote:
Hi,
Is it recommended to run three STM-1 (PA-POS-1OC3) on a single
Cisco700vxr with NPE-G1 ?
Technically, it is supported, as each of the two buses have 600
bandwidth points, with an STM-1 interface taking up 300. Question is
whether it might be recommendable to get a second router for redundancy
reasons, e.g. if you are terminating several uplinks with that one
router. If so, I'd advise against doing it all on one router ...
-garry
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
