Doug,
The only issue is the XM is not EOL and the 3640 is, I think. I may be
able to dig up a 3640 in my office, if not I'll probably go with a 2691.
-Jason
Doug McIntyre wrote:
On Wed, Jul 16, 2008 at 06:56:37PM -0400, Jason Berenson wrote:
So, according to this at table 3:
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet09186a00801aa71c.html
the NM-2FE are not supported on the 2651XM. Any idea as to how I could get
3 FE ports on a 2651XM? I don't need anywhere near line speed but need the
link to sync up at 100M full duplex. If not I guess I'll have to just get
a 2691. :(
Right, anything with a LAN port on an NM card isn't supported in a
26xx(plain or XM) (with the 2691 excepted, maybe they should have
called it the 3610 or something.. :).
There's the NM-16ESW which would fit into the 2651XM and function as
one more FE port with 16 switch ports behind it.
I personally would swap out the chassis for a 3640, which gives you a
little more CPU than the 2651XM, and you can fit alot more cards/ports
into it.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/