On Thu, 17 Jul 2008, Paul Stewart wrote:
5 minute output rate 817892000 bits/sec, 133528 packets/sec
This can't go up much over around 930-940k (depending on your packet size mix), so you have very little headroom left, especially due to..
I've ordered a new x-connect with the idea of running etherchannel... my real question is how much further can I push this link? There's no latency or issues that are evident yet but wanted to ask anyways....
the 7600 doesn't have much buffers, so even when you're dropping packets, don't expect to see more than 3-5 ms of increased latency over the link.
-- Mikael Abrahamsson email: [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
