Asbjorn - This is useful in the case of L2-->L1 Route-Leaking where you *may* not want L1-Router to use its default to point to L1L2 router and L1L2 end up in dropping the traffic. With Route-Leaking, L1-Router does get the specific routes. This way, for any traffic that L1 doesn't know, it will drop itself rather than sending to L1L2 and then L1L2 dropping it. Hope it is clear. -Shankar
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Asbjorn Hojmark - Lists Sent: Wednesday, July 23, 2008 2:19 PM To: Oliver Boehmer (oboehmer); [EMAIL PROTECTED] Cc: [email protected] Subject: Re: [c-nsp] IS-IS: Ignore Attached Bit > r(config)#router isis > r(config-router)#ignore-attached-bit > r(config-router)# When/why would you want to do that? -A _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
