On Fri, Jul 25, 2008 at 02:44:02PM -0400, Jeff Fitzwater wrote: > I have 6500 with sup-720 with PFC3CXL and I just inserted new DFCXL > 8port 10G module which logged some strange messages but still came up > and appears OK. > > Any ideas on these before I get in touch with cisco tech ? > > These messages appeared just before initial module diags finished and > module came online.... > > 17:22:40.583 FW[Mod 12]: AR#0 WARNING: Cannot HALT Dic#0 > 17:22:40.591 FW[Mod 12]: ME_AR#0 WARNING: Cannot FLUSH Dic#0 > 17:22:40.631 FW[Mod 12]: AR#1 WARNING: Cannot HALT Dic#0 > 17:22:40.643 FW[Mod 12]: ME_AR#1 WARNING: Cannot FLUSH Dic#0 > 17:22:40.683 FW[Mod 12]: AR#0 WARNING: Cannot HALT Dic#1 > 17:22:40.691 FW[Mod 12]: ME_AR#0 WARNING: Cannot FLUSH Dic#1 > 17:22:40.735 FW[Mod 12]: AR#1 WARNING: Cannot HALT Dic#1 > 17:22:40.743 FW[Mod 12]: ME_AR#1 WARNING: Cannot FLUSH Dic#1 > > Jeff,
i have seen them also (WS-X6708-10G-3C, Sup720-PFC3B, IOS SXH2a) and asked Cisco Anvanced Services about it. The answer was that it is nothing to worry about. It should be seen as a cosmetical issue, and there is an internal bug-id to remove the message during module initialization in future software releases. reinhold _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
