Howdy,
I have two 1231G units running 12.3(2)JA3 that I'm attempting to setup
as a bridge. Unit #1 uplinks to the FastE interface fine, with
standard bridge, ssid and sub-interface stances to yield multiple
SSIDs/VLANs on its DotRadio0 (11b) interface - works great. Unit #2
is supposed to connect to Unit #1 over DotRadio1 (11a) as a
transparent bridge and continue to advertise the same multiple SSIDs/
VLANs on its other radio - DotRadio0 (11b).
After trying a number of configuration combinations, it's unclear if
this product generation/IOS version supports multi-VLAN bridging - as
the 1400s clearly do. Also, it's a tad unclear what the exact syntax
of "station-role" the bridge interfaces should be in; with the above
configuration I assume "root bridge" on unit #1 and "non-root bridge"
on unit #2 - the examples I find are for slightly different hardware
versions. Much appreciate confirmation support exists for this and
tips on how to yield my desired configuration - cheers!
--Matt
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
