i was thinking the problem was 'outbound' maps, but then when double checking i saw this
Restrictions for BGP Route-Map Continue •Continue clauses are supported in outbound route maps only in Cisco IOS Release 12.0(31)S and subsequent releases. http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/cs_brmcs.html On Thu, Aug 14, 2008 at 2:38 PM, Peter Rathlev <[EMAIL PROTECTED]> wrote: > On Thu, 2008-08-14 at 18:18 +0300, Dmitry Kiselev wrote: >> Hello! >> >> Does anybody can clear for me the continue statement behaviour? >> >> router bgp 111 >> ... >> neighbor 10.10.10.2 route-map TEST-OUT out >> neighbor 10.10.10.2 send-community >> ... >> >> route-map TEST-OUT permit 10 >> match community 10 >> continue 20 >> ! >> route-map TEST-OUT permit 20 >> set metric 222 >> set as-path prepend 111 111 111 >> ! >> >> The bgp neighbor receive all prefixes, but community matched >> are still without prepends and med. Is it correct behaviour? >> >> P.S. Tested in 12.2S on 7200 > > According to FN you need 12.2SRC or 12.4T for outbound route-map > continue support. > > Regards, > Peter > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
