We have layer 2 connectivity from our main office to an offsite facility where
our servers reside. We are connected via fiber but is not a dedicated circuit.
Recently I created a VLAN with same ID on both switches (main office and
Offsite facility) . I trunked the port on both ends but not traffic passes on
this VLAN. Obviously only VLAN 1 works. According to a consultant the provider
of the fiber connection needs to turn "something" on for us to be able to pass
VLAN traffic other than VLAN 1's. What would be that "something", he does not
even kow it himself.
Can anybody shed any light on this?. We are urgently needing to have a separate
VLAN for our VOIP traffic.
Thanks
John
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
