I've been doing this TAC support job for 10 years as of this month and one thing I've learned is "never say never" ;)
...to get it to the output interface code must be run to set the outbound tx ring so that means a lookup must happen. I'm saying I'm skeptical about what you are reporting. ;) On Thu, Aug 21, 2008 at 05:18:09PM +0200, Elmar K. Bins wrote: > Re, > > [EMAIL PROTECTED] (Rodney Dunn) wrote: > > > Do they have the full frame so you can see if the dmac has > > been rewritten in the frame to point to the L3 next hop of > > the exchange point? > > > > Or does the frame have the srcmac of the server and the dmac > > of the Portchannel1 interface in it? > > The frame carries the server NIC's MAC as the source, and > the Portchannel MAC as the destination ethernet address. > > This looks a lot like bridging... > Elmi. > > PS: "show int <...> irb" shows routed only. > > -- > > "Hinken ist kein Mangel eines Vergleichs, sondern sollte als wesentliche > Eigenschaft von Vergleichen angesehen werden." (Marius Fr?nzel in desd) > > --------------------------------------------------------------[ ELMI-RIPE ]--- > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
