That is correct. But if I do show vlan on the ace module it doesn't show up even though it is associated to vlan group 9706
Sea-ACE-A/Admin# show vlans Vlans configured on SUP for this module vlan100 vlan120 vlan138 vlan150 vlan190 vlan200 vlan210 vlan235 vlan238 vlan555 vlan801-803 vlan999 Sea-ACE-B/Admin# show vlans Vlans configured on SUP for this module vlan100 vlan200 vlan210 vlan235 vlan238 vlan555 vlan801-803 -----Original Message----- From: Tony Varriale [mailto:[EMAIL PROTECTED] Sent: Thursday, August 21, 2008 4:16 PM To: Teller, Robert; [email protected] Subject: Re: [c-nsp] Cisco ACE Context Would you do a sh vlan b on sup-b? Is 138 there? tv ----- Original Message ----- From: "Teller, Robert" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, August 21, 2008 5:47 PM Subject: [c-nsp] Cisco ACE Context >I have two cisco 6509 chassis with ace and fwsm modules. I have > configured the ace blades to use an internal and external conext. On > ACE-A I am able to bring up both contexts and everything talks just fine > but on ACE-B I can't bring up vlan 138. Is there something I'm missing? > > > > ------------------------------------------------------------------------ > ----------------------------------------- > > svclc autostate > > svclc multiple-vlan-interfaces > > svclc module 7 vlan-group 9706, > > firewall autostate > > firewall multiple-vlan-interfaces > > firewall module 3 vlan-group 9706, > > firewall vlan-group 9706 > 100,120,138,150,190,200,210,235,238,555,575,801-804 > > firewall vlan-group 9706 999 > > ------------------------------------------------------------------------ > ----------------------------------------- > > > > ADMIN Context > > ------------------------------------------------------------------------ > ----------------------------------------- > > ft interface vlan 801 > > ip address XXX.XXX.XXX.145 255.255.255.252 > > peer ip address XXX.XXX.XXX.146 255.255.255.252 > > no shutdown > > > > ft peer 1 > > heartbeat interval 300 > > heartbeat count 20 > > ft-interface vlan 801 > > ft group 1 > > peer 1 > > priority 200 > > associate-context Admin > > inservice > > > > context WDS-External > > allocate-interface vlan 138 > > context WDS-Internal > > allocate-interface vlan 238 > > > > ft group 2 > > peer 1 > > priority 200 > > associate-context WDS-Internal > > inservice > > ft group 3 > > peer 1 > > priority 200 > > associate-context WDS-External > > inservice > > ------------------------------------------------------------------------ > ----------------------------------------- > > > > context WDS-External > > ------------------------------------------------------------------------ > ----------------------------------------- > > interface vlan 138 > > ip address XXX.XXX.XXX.150 255.255.255.192 > > alias XXX.XXX.XXX.188 255.255.255.192 > > peer ip address XXX.XXX.XXX.189 255.255.255.192 > > access-group input any > > service-policy input REMOTE_MGMT_ALLOW_POLICY > > no shutdown > > > > vlan138 is down, VLAN not assigned from the supervisor > > Hardware type is VLAN > > MAC address is 00:1f:6c:89:0c:33 > > Mode : routed > > IP address is XXX.XXX.XXX.150 netmask is 255.255.255.192 > > FT status is standby > > Description:not set > > MTU: 1500 bytes > > Last cleared: never > > Alias IP address is XXX.XXX.XXX.188 netmask is 255.255.255.192 > > Peer IP address is XXX.XXX.XXX.189 Peer IP netmask is 255.255.255.192 > > Not assigned from the Supervisor, down on Supervisor > > Service-policy download failures : 3 > > 0 unicast packets input, 0 bytes > > 0 multicast, 0 broadcast > > 0 input errors, 0 unknown, 0 ignored, 0 unicast RPF drops > > 0 unicast packets output, 0 bytes > > 0 multicast, 0 broadcast > > 0 output errors, 0 ignored > > ------------------------------------------------------------------------ > ----------------------------------------- > > > > Robert Teller > Washington Dental Service > Network Administrator > (206) 528-2371 > [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > > > > ######################################################### > The information contained in this e-mail and subsequent attachments may be > privileged, > confidential and protected from disclosure. This transmission is intended > for the sole > use of the individual and entity to whom it is addressed. If you are not > the intended > recipient, any dissemination, distribution or copying is strictly > prohibited. If you > think that you have received this message in error, please e-mail the > sender at the above > e-mail address. > ######################################################### > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
