Thanks Pete, Non disruptive tests haven't indicated anything as yet. Will try when we go down for outage.
Cheers, Aaron. -----Original Message----- From: Peter Rathlev [mailto:[EMAIL PROTECTED] Sent: Thursday, 4 September 2008 3:22 AM To: Aaron Riemer Cc: [email protected] Subject: Re: [c-nsp] 6500 WS-SUP32-GE-3B failure On Wed, 2008-09-03 at 17:05 +0800, Aaron Riemer wrote: > We currently have a WS-SUP32-GE-3B where the SFP ports are not coming > online. Is there a test that can be run from the switch to detect if > there is a hardware failure? A sh module indicates that the SUP is ok.. You could try the "diagnostic start module X test Y" commands. It can do some non-disruptive tests too. Regards, Peter LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
