Your basis of radius attributes will most likely be : Framed-Protocol := PPP Framed-MTU := 1500 Framed-IP-Address := 192.168.1.100 Framed-IP-Netmask := 255.255.255.255 Service-Type := Framed-User And the required Cisco-AVPair attribute.
and you shouldn't require a second pool on your 7206. The pool would only serve a function if you were assigning on a per-authentication basis, were it would take a new ip from the pool for each new connection. You can use either a sql db or flatfile for the commands. Regards, -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rhino Lists Sent: Monday, September 08, 2008 5:01 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] PPPOE Static IP I have a cisco 7206 terminating PPPOE DSL connections via Radius. I have a user who wants a static IP. Do I need to create another ip pool and how do I assign the IP in radius? K _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Please note: This email and its content are subject to the disclaimer as displayed at the following link http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm. Should you not have Web access, send a mail to [EMAIL PROTECTED] and a copy will be emailed to you. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/