checked for any switches after the inputting the ip address on logging host command but nothing was available
#logging host 1.1.1.1 transport ? % Unrecognized command On Wed, Sep 10, 2008 at 3:55 PM, Tassos Chatzithomaoglou <[EMAIL PROTECTED]> wrote: > Have you tried "logging host XXX transport udp port Y"? > > -- > Tassos > > Christian Koch wrote on 10/09/2008 19:41: >> >> I know i can set the remote syslog port on ASA/PIX's, but i don't seem >> to see that it is possible in IOS. >> >> I wanted to segregate logs by sending them from certain devices to >> separate syslog ports >> >> Can anyone confirm this behavior? >> >> Has anyone had the need to do something similar? >> >> Thanks >> >> >> Christian >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/