On Wed September 10 2008 14:33, Rhino Lists wrote: > I have a 7206 terminating DSL connections currently I only have it pointed > to my primary RADIUS server. I am now wanting to also point it to my > backup RADIUS server for the obvious reasons. I have the following in > mind: > > > > radius-server dead-criteria time 5 tries 4 > > radius-server host aaa.bbb.ccc.5 auth-port 1812 acct-port 1813 > > radius-server host aaa.bbb.ccc.6 auth-port 1812 acct-port 1813 > > radius-server deadtime 1 > > With this current config how long can the primary be down or will it always > try the secondary when the primary is down?
Believe the "deadtime" tells the router how long to "ignore" a non-responsive radius server. The default is 0, which says always check the servers in the order given. With a deadtime of 1 (minute) your router should "ignore" that server for 1 minute if it is not responsive, and then try it again (and ignore another minute if still not responding). -- Larry Smith [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/