Hi there.
We have our first IPv6 block advertising to the world (for quite a while now) and have started to actually route some small blocks of it internally via OSPF. Our /32 is advertised via eBGP no problem and the world can see it.. Internally, we have a series of /128 loopbacks, /126 point to points, and a /64 block setup for some servers. Obviously all small chunks of the /32 assignment. My problem is that the world can reach our border routers but traffic will not route beyond the border. Internally, we can route traffic no problem.. Config looks basically like this: router bgp 00000 address-family ipv6 no synchronization network 0000:0000::/32 ipv6 route 0000:0000::/32 Null0 ipv6 router ospf 1 log-adjacency-changes default-information originate redistribute connected Then the applicable nei statements and ospf for IPv6 is enabled on certain interfaces... Could post more config but hopefully this triggers someone with an answer ;) The block is showing fine as a /32 to the world and internally everything is reachable via ospf.. I know it has something to do with the small subnets inside of the /32 but drawing a blank.. Thanks ;) Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
