Thank you for all! The no autostate command on the vlan interface helped our problem.
Best Regards, Romeo B. -----Original Message----- From: Tim Franklin [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 01, 2008 3:54 PM To: Bagosi Rómeó Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Forcing VLAN interface to UP state On Wed, October 1, 2008 2:02 pm, Bagosi Rómeó wrote: > Is there a way to force a VLAN interface (ex.: interface vlan 400) to > UP/UP state on a Cisco UC520 (router, switch...), WITHOUT connecting a > device to a port which is in the mentioned VLAN? 'no autostate' on the vlan interface works for 87x. No idea if that's valid or not for the UC520, sorry. Regards, Tim. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/